As per request, here is a guide of how to setup what we commonly refer to as the 'radio'.
What you need:
Firstly you'll need a vent server. Currently we use the GK backup vent, which has just 8 slots (pm myself or Deltateam for the address). If anyone has a better vent server with more slots that would be awesome, so that more dudes can listen in.
You'll ideally have a 2nd machine to run hostile comms + vent client (setup as below) + audacity for recording. Оn your main machinе you'll have mumble (so you can tell fc's info) + a vent client (so you can listen to the stream).
Setup:
Go into your sound settings‚ right-click and check 'show disabled devices'. Then enable 'Stereo Mix'. This step is also required for audacity to record comms.
stereomix.jpg
If stereo mix doesn't exist for whatever reason (e.g. on my old XP laptop with shitty realtek drivers) you'll need a gay audio cable (3.5mm male to male) going from your speaker/headphone output to the line-in socket.
Your vent client needs to be setup like this:
ventradiosettings.jpg
The input device must be set to 'stereo mix', PTT must be disabled, and set the sensitivity to a low value. Please note that this will broadcast every sound your ОS makеs‚ ѕo I suggеst disabling windows sound effects.